Go to content

Main menu:



Since 2002 GAZOMET has been organising technical trainings directed to employees of:
• investment departments realising investments for Polish gas industry,
• operating departments using gas equipment,
• for installers of gas equipment,
• for designers of design offices.

Our trainings have a good reputation, as proven by over four thousand participants of meetings on gas technology organised by us.
Trainings organised by GAZOMET  are divided as follows:
• theory classes (which are given in a well-equipped audiovisual room),
• practical classes(which are given in a well-equipped room for practical classes).

We would like to invite you for the following types of trainings:
• basic training (A type),
• thematic training (B1, B2, B3, B4 types).

B1 – shut-off equipment and pressure equipment,
B2 – regulating technology and safety equipment,
B3 – measuring technology, gas quality measurements,
B4 – gas stations – construction, rules for equipment selection, operation; automatic regulation of gas stations.

Training dates shall be agreed by e-mail or by phone, after sending the completed application form for training participation to e-mail address:

Marek Maćkowiak - Marketing  Department
Tel. +48 65 545 0222
Fax +48 65 546 2408


Construction and operation of equipment used in gas industry
two-day training

• shut-off equipment – gas ball valves,
• pressure equipment – filters, heat exchangers, combined filter-heat exchangers, gas filter-separators,
• pressure vessels – requirements, regulations, application, regulations and standards in force…
• regulating technology – gas pressure regulators for Io gas stations, gas pressure regulators for IIo gas stations, safety equipment, shut-off valves, safety equipment – safety relief valves,…
• measuring technology – mechanical gas meters, electronic gas meters, correctors, electronic converters, measuring transducers, gas analyzers, gas odorising plants with controller, supportive devices, gas quality measurements,…
• regulating and measuring gas stations – standards and regulations in force for gas stations’ construction, gas stations’ schemes, realisation, service and operation.


Ball valves and pressure vessels. Equipment.
one-day training

I. Equipment:
1. Shut-off equipment
• gate valves
• throttle valves
• poppet valves
• conical valves
• ball valves
2. Ball valves
• construction – parts demonstration and the assembly of KSK-DN50/PN16 ball valve
• principle of operation
II. Design solutions in ball valves
1. Sealing’s compensation
2. Cross coupling
3. Sealing packages for a stem
4. Lubrication and sealing
5. Antistatic connection
6. Independent ring
7. KOK
9. NOK
10. Metal/metal
11. Fire resistance
12. Slide bearings
III. Stages of ball valve production
1. Departments:
• Construction
• Technology
• Mechanical (numerically controlled machine tools, Supfina)
• Assembly (tightness tests of KSK ball valve)
• Laboratory (measurement)
IV. What is expected of a ball valve
1. Safety
• materials
• certificates of material
• calculations and safety coefficients
• strength tests
• design solutions – stem protection against blow-out
2. Internal tightness (of closure) and external tightness
• quality of ball’s production guarantees tightness (smoothness, without galvanic coating, balls’ tests)
• multistage stem sealing, graphite gaskets
3. Correct working
• ball valve’s torque
• working under full pressure
V. Practical classes
Demonstration and discussion on design solutions in ball valves. Assembly. Ball valves’ tests.
• BVn/BVk/BVs
• columns
VI. Equipment for ball valves
• Vent plug
• Drain plug
• Sealing system
• Bypass
• Columns
• Mechanical actuators
• Electrical, pneumatic actuators, etc.
VII. Ball valves in operation
1. Documents and approvals
2. Anticorrosion coating
3. Transport
4. Assembly and service
5. Testing and strength tests
6. Operation
7. Maintenance
8. Spare parts
VIII. Pressure equipment
1. Filter cartridges
2. Gas filters F
3. Gas filters FG
4. Gas filters FG PN16 new design
5. Gas filter-separators FGWS
6. Gas filter-separators FGWS PN 16 new design
7. Gas heat exchangers PG
8. Gas heat exchangers PG PN63 new design
9. Combined filter-heat exchangers FGWC
10. Selection of pressure equipment
11. Tests of filter cartridges
12. Replacement of filter cartridges
13. Service, operation of pressure equipment


Regulating and safety technology  
one-day training

1. Technical standards – Polish/European
2. Notions/names, physical basics
3. Direct-acting and pilot-operated gas pressure regulators
4. Accuracy classes
5. Division of regulators
6. Parameters influencing the regulator’s selection
7. Rules for the regulator’s selection
8. Calculating KG coefficient
9. AC accuracy classes
10. Calculating of safety equipment
11. Application of equipment in gas stations – variants, examples
12. Application of equipment in gas stations – calculations, equipment’s selection
13. Equipment
14. Practical classes


Measuring technology. Gas quality measurements
one-day training

Quality measurements
1.       Introduction to chromatography
2.       PGC 9000 VC, PGC 900 BBQ chromatographs
3.       Gas-quality measuring device EMC 500
4.       Correction

1.       Turbine gas meters TRZ03, TRZ 04
2.       Electronic turbine meter TERZ 94
3.       Ultrasonic gas meters USZ 08, USM GT400
4.       Comparison of gas meters
Gas odorising plants
1.       Gas odorising plants – contactual, contactual constant-level and constant-temperature, injection.
2.       Presentation of the offered odorising systems GOE 03, GOE 07, GOE 2000, GOE SO.
Demonstration of gas odorising plant GOE 2000 with OSG controller.


Gas stations. Construction. Rules for equipment selection. Operation. Automatic regulation of gas stations
one-day training

Part I
1.       Standards and regulations for gas stations.
2.       Division of gas stations.
Order of action of regulating and safety equipment in IIo gas station.
A.      Regulating and measuring points, regulating points, gas measuring points – schemes, discussion on points’ construction.
B.      One-line gas stations – discussion on construction.
C.      Two-line gas stations of medium pressure – stations’ schemes, discussion on construction.
Order of action of regulating and safety equipment in Io gas station.
D.      Gas stations of medium increased and high pressure – schemes, discussion.
3.       Methods of noise reduction in gas stations.
4.       Examples of execution.
5.       Regulating and safety equipment applied in gas stations.
6.       System of telemetric data collection.
7.       Underground gas stations.
8.       Gas odorising plants – contactual, contactual constant-level and constant-temperature, injection.
9.       Gas stations operation.
Part II
Gas stations – equipment selection
1.       Standards and regulations.
2.       Equipment selection – gas regulating and measuring points.
3.       Gas regulating and measuring station of IIo.
4.       Gas regulating and measuring station of Io.
5.       Selection of pipe’s nominal diameter.
6.       Velocity calculation of gas flow.
7.       Selection of equipment before reduction.
8.       Selection of equipment after reduction.
9.       Regulator’s selection.
10.   Measuring line – gas meter’s selection.
11.   Selection of gas filtration system.
12.   Selection of heat exchangers.
Part III
Gas stations – boiler room
1.       Open heating system.
2.       Closed heating system.
3.       Protection of heat exchangers in closed system.
4.       Detailed solutions of boiler room in closed system
·         equipment set points,
·         controlling the gas boiler room,
·         algorithm controlling the gas boiler room.
5.       Examples of execution.
Part IV
Modular gas stations
Part V
Maintenance and operation of gas stations

Gas odorising plants
one-day training

1. Gas odorising plants – contactual, contactual constant-level and constant-temperature, injection.
2. Presentation of the offered odorising systems GOE 03, GOE 07, GOE 2000, GOE SO.
3. Demonstration of gas odorising plant GOE 2000 with OSG controller.
4. Gas odorising plant’s operation.

Back to content | Back to main menu